Kable Lights

Pivot architectural head for use with Tech Lighting's Kable Lite system Features Finish: Satin Nickel Cable Separation: 1 inch, 2 inches, 3.5 inch...

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-...

Slimline anchors for use with Tech Lighting's Kable Lite System. Recommended for short, straight runs under 20-ft Features Finish: Satin Nickel Sl...

Pair of power jumpers transfers power from one cable run to another Features Finish: Satin Nickel Includes 24" of insulating tubing to cover where...

Stylish satin nickel turnbuckle Features Finish: Satin Nickel Turnbuckles tighten and secure the cables and provide the necessary tension for a cl...

Features Bare cable is #10 gauge tin-plated copper cable. Rated for 300 watts at 12 volts, 600 watts at 24 volts. Load: 300 watt maximum at 12 vo...

Isolating connectors for use with Tech Lighting's Kable Lite system Features Type: Insulated Cable, Bare Cable Plastic connectors join cables end ...

This single-feed flush transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-vo...

150W 12V single feed electronic surface transformer for use with Tech Lighting's Kable Lite system Features Type: Electronic Input Voltage: 120V O...

This single-feed surface transformer converts standard 120 volt line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite...

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-...

Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look. Features Finish: Satin Nickel Type: Conductive, Isol...

Suspension cable virtually disappears for a clean and elegant look. Provides support for runs over 20 feet. Features Finish: Satin Nickel Length: ...

Features Come as a pair Hardware used to mount turnbuckles and anchors to a plaster surface Dimensions Width: 1" Height: 1" Documents Spec S...

Hardware used to mount turnbuckles and anchors to a brick or cement surface Features Come as a pair Dimensions Width: 0.5" Height: 0.5" Docum...

Directional hardware for making a floating horizontal turn when the ceiling is inaccessible. Features Finish: Satin Nickel Includes six feet of fi...

Power feed turnbuckles pipe power from a single-feed remote transformer through an accessible wall or ceiling and terminate the run. Features Fini...

Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look. Features Finish: Satin Nickel For long or turning ru...

Kable Lite systems with several turns will require inline turnbuckles to provide tension within the run Features Finish: Satin Nickel Type: Conduc...

Features Finish: Satin Nickel This outside rigger attaches to the wall to secure cables 12" from the wall at 2" cable separation Use when a wall-t...

A wall turn attaches to a surface to make simple turns. Features Finish: Satin Nickel Includes insulating tubing to cover where cables cross Come ...

Features Finish: Satin Nickel Cable Separation: 3.5 inches, 5.5 inches, 8 inches Mounts to ceiling Provides support for long runs or runs with a c...

Features Finish: Satin Nickel Separation: 5.5 inches Mounts to ceiling Provides support for long runs or runs with a changing cable drop Off...

Rigid post standoff turn for use with Tech Lighting's Kable Lite system Features Type: Standoff Turn Length: 1 inch, 2.5 inches, 5 inches, 12 inch...

Heavy duty standoffs for use with Tech Lighting's Kable Lite system. Features Finish: Satin Nickel Heavy duty standoffs support Kable Lite systems...

Features Finish: Satin Nickel For short, straight runs (runs under 20') Use to secure cables at one end of run (with turnbuckles at other end) Mou...

Rigid post standoff for use with Tech Lighting's Kable Lite system Features Type: Standoff Alone Length: 1 inch, 2.5 inches, 5 inches, 12 inches F...

Power feed standoffs bring power to the cables within the run Features Finish: Satin Nickel Length: 2.5 inches, 12 inches Pair of rigid standoff...

Center Power Feeds are generally used to bring power to a Kable Lite system when the transformer or canopy cannot be located directly above the run...

A dual-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run. Features Finish: Satin Nickel It can be used anywhere in the ru...

A single-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run. Features Finish: Satin Nickel It can be used anywhere in the ...

A single-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run. Features Finish: Satin Nickel A single-feed canopy is mounted...

Features Kit only - elements (pendants and spot heads) sold separately Finish: Satin Nickel Kits includes: 1 x 45' of bare cable (enough for a tw...

The K-Jane display head by Tech Lighting combines design simplicity with practical technology. This highly-functional display head pivots 220° on t...

Kable Lite kit with 300 watt surface magnetic transformer. Spot heads and pendants sold separately. Features Kit only - elements (spot heads and p...

Kable Lite kit with 150 watt surface magnetic transformer. Spot heads and pendants sold separately. Features: Kit only - elements (spot heads and ...